This cute burp towel is fast and easy to whip up in no time! Great for a baby shower gift!
Measures about 24 inches by 11 inches in the middle
1/2 yard of terry cotton toweling
1/2 yard cotton fabric for ruffle
Store-bought appliques or cut your own from fabric
Helpful but not necessary ~ Ruffler foot
This ruffler attachment is great to have if you make lots of ruffles.
1. Scroll to the bottom of this entry, click on the pattern to download and print. Cut out. Lay out terry toweling and fold in half. Raw edges should be at the top. Place straight edge of pattern on fold. Pin and cut out. Make two of these.
2.Open up towels and lay out. At this point, you can add your own touch. You can use store-bought appliques or cut out cute bears, stars, rattles, flowers or whatever you like.
Keep it simple, you want the babies face to be touching the nice soft towel not a bunch of appliques.
I used a butterfly I cut from fabric and 3 small bees.
3. I positioned these appliques near one of the bottom edges.
I love using applique pins to hold small fabric pieces in place.
For really small pieces, like my bees, use a dab of glue stick.
4. Hand stitch or free motion stitch applique pieces in place, using clear or matching thread.
5. Take the cotton print, and fold in half (selvage edges at top) and cut 3-6inch strips.
6.With right sides together, pin ends together and sew 1/4 inch seam, attach other strip in the same way, until you have one long strip.
7. Press seams open.
8. Fold over each end 1/4 inch, then 1/4 inch again. Press in place and stitch.
9. Fold strip in half, wrong sides together and press. This makes a 3-wide, long strip, right sides out.
10. Hand or machine-baste 1/4 inch from raw edge
12. Pull up threads and cut, leaving long thread tails to pull to make the gathers.
13. Sew 1/4 inch from previous stitching. At the end, pulling up threads again. *Make sure when you are sewing second line of stitching, have previous thread tails pulled out of the way.
14. Pull up thread tails and evenly distribute gathers from end to end, do not tie off threads, wrap around a pin, so you can do final adjustments.
15. Start pinning ruffle to right side middle edge. Raw edges of ruffle aligned with towel edge.Overlap ends about 1 inch.
16. Hand or machine baste in place, and remove all pins.
17. Place back piece on top of front with right sides together, sandwiching ruffle in the middle. Pin in place,leaving an opening on one side about 4-1/2 inches long.
18. Stitch all the layers together with a 5/8 inch seam. You don't have to clip any curves.
19. Turn right side out through opening.
20. Slipstitch opening closed.
Adorable and ready for that special little someone!
Baby Burp Towel Pattern
If you have any questions e-mail me at firstname.lastname@example.org